Exterior Walls

Primers & Repairs

                          Product Prices>>

Primer 44 HS - Impregnating Primer

DESCRIPTION
Ready to use solvent based impregnation primer based on chlorinated rubber.

MAIN PROPERTIES
Large fixing capacity - unsapomfiable - good UV-resistance - flexible.

RECOMMENDED USES
Fixing and adhesion layer for porous and unpainted mineral substrates.

Adex - Wood Impregnation

DESCRIPTION
Solvent based impregnating product containing phenolic resins.

MAIN PROPERTIES
Reinforces the wood structure - improves the adhesion of the paint or varnish system that is applied on the wood.

RECOMMENDED USES
impregnation of new exterior wood that is not of first quality or bare exterior wood that is damaged in some way. Priming coat under PlastiParket.

Pegalink - Universal Adhesion Primer

DESCRIPTION
Universal adhesion primer based on water dispersed acrylic resins.

MAIN PROPERTIES
Excellent adhesion, flexible, UV-resistant, excellent flow.

RECOMMENDED USES
Adhesion on a lot of surfaces: wood, gypsum, cement, bricks and especially on smooth and difficult to adhere to surfaces like: galvanized steel, copper, zinc, polycarbonate, hard PVC, Pegagraff Hydro, etc. Can be used in- and outdoors.

Zinsser Bulls-Eye 1-2-3

DESCRIPTION
100% acrylrc resin water-based interior/exterior stain blocking sealer & adhesion primer.

MAIN PROPERTIES
Fast drying - adheres to glossy surfaces without pre-sanding or de-glossing - rust inhibitive coating - resists mould & mildew on dried film - high pH resistance - seals common graffiti plains - compatible with oil or latex topcoats.

RECOMMENDED USES
Product can be applied on Interior and exterior walls, ceilings, doors, trim, foundations, railings, and related paintable surfaces. Bulls-Eye 1-2-3 adheres on wood. plaster, concrete, gloss enamels, hardboard, glass and tile The product provides a rust inhibitive coating on iron railings, steel frames, piping, etc. Resists the growth of mould and mildew on dried film in damp, humid environments. Resistant to high pH surfaces (up to 12.5) Including, plaster, poured concrete, concrete block and stucco. Seals porous surfaces and traps most stains in the primer fiIm (graffiti, grease, rust, cedar & redwood tannin, creosote and asphalt stains). Some stains may require a second coat.
Interior Substrates: new or previously painted drywall, cured plaster, cement, poured concrete, concrete block, stucco, wood (pine, fir, birch, oak and plywood), aluminum, Iron, Steel and galvanized metal, PVC, glossy laminates and other Interior surfaces.
Exterior Substrates: recommended for all types of wood (new or previously painted pine, cedar, redwood, plywood and pressure treated wood), hardboard, metal (aluminium, steel, iron and galvanized metal'. PVC. fiberglass, masonry (stucco: concrete block: poured concrete and brick).

Murfill Fleece - Reinforcement fleece (woven or non woven)

DESCRIPTION
Polyester fibres woven in hexagonal meshes

RECOMMENDED USES
Reinforcement of the first coat of Dakfill New for the system Dakfill-Water proofing.

Topcoats & Systems

Murfill Waterproofing Coating - Waterproofing for walls

DESCRIPTION
Elastic and waterproof coating based on water dispersed high polymers

MAIN PROPERTIES
400% elastic - waterproof and water vapour permeable - excellent resistance against ageing in normal and industrial environment - protects reinforced concrete against carbonisation and corrosion - can be combined with Murfill fleece for additional mechanical reinforcement and for bridging of (active) cracks.

RECOMMENDED USES
Coating and waterproofing of walls and facades.

Murfill Quartz - Waterproofing (quartz structure) for walls

DESCRIPTION
Elastic and waterproof coating based on water dispersed high polymers.

MAIN PROPERTIES
Elastic - waterproof and water vapour permeable - excellent resistance against ageing in normal and Industrial environment - protects steel reinforced concrete against carbonization and corrosion.

RECOMMENDED USES
• Coating and waterproofing of waTIs and facades.
• Can be applied on substrates such as masonry, concrete, brick and cellular concrete.
• Repair small areas of damage or irregularties in the substrate.

Murfill Renovation Paint - Renovation paint for walls

DESCRIPTION
Matt and long-lasting elastic renovation paint. Ideal for renovation and decoration of historical and new buildings.

MAIN PROPERTIES
500% e astic- permanently elastic until minus 30°C -very matt finish -excellent resistance against dirt thanks to its unique formulation - water vapour permeable - excellent resistance against ageing in normal and industrial environment - can be combined with Murfill fleece for
additional mechanical reinforcement and for bridging of (active) cracks.

RECOMMENDED USES
Coating of walls and facades.

RUST-OLEUM® WATERPROOF

DESCRIPTION
Rust-Oleum® Waterproof is an instant leak repair coating based on solvent soluble high polymers (acrylic and alkyd binders) reinforced with fibres.

MAIN PROPERTIES
A ready to use waterproofing repair compound for instant leak repairs in any weather condition - Idea for repairs to roofs, gutters, drain pipes, ridge-pieces, sky lights, cornices, chimney stacks, pipes, etc. - Seals leaks instantly, even on damp or wet surfaces - Forms a durable elastic coating (1300%) that withstands temperature changes and UV-light- Bridges
cracks up to 2 mm (larger cracks can be treated with a special reinforcement fleece) - Adheres to: roofing, felt, slate, corrugated, bitumen, asphalt, hard PVC, polyester, zinc, brickwork, aluminium, glass, tiles and many other substrates - Available in 5 litre packaging or in a handy 1 litre emergency repair set.

RECOMMENDED USES
Waterproof finish of roofs, non-walkable terraces, gutters, ridge pieces, chimney stacks, pipes, etc.

Zinsser Watertite

DESCRIPTION
Low-odour, solvent-based, acrylic, waterproofing paint. Two coat system. The first coat primes and seals the surface. The second coat completes the seaJing process to ensure protection against water intrusion and mildew growth on the paint film.

MAIN PROPERTIES
Stops up to 2,5 bar water pressure (twice the strength of latex
waterproofers) - less odour than latex paint - prevents water-seepage through cement, masonry and concrete block walls and basement floor - prevents the growth of mould & mildew on the paint film - cam be applied to wet or dry surfaces - smooth, non-yellowing eggshell finish - interior or exterior application - prevents recurring efflorescence - fast drying - great for alkaline surfaces up to 12.5 pH.

RECOMMENDED USES
For application on interior and exterior concrete, stucco, cement, cinder block and other masonry surfaces. Product is ideal for interior basement walls and for sealing concrete basement slabs prior to installing flooring (not recommended for foot traffic). Can also be applied on exterior foundations and retaining walls, above and below grade.

Durbocem - Paint for damp walls

DESCRIPTION
Solvent-based paint based on plasticized acrylic resins for inside and outside use.

MAIN PROPERTIES
• Builds a strong bond wrth the damp substrate.
• Can be applied on chalking substrates.
• Builds a strong bond with cement-based substrates.
• Contains cement, and therefore thrs product is extremely suitable to   be applied on damp substrates.
• Can be recoated with Paracem (when the substrate is dry).

RECOMMENDED USES
Painting of damp walls and cellars

Coating PRT - Unsaponifiable Coating

DESCRIPTION
Solvent based acrylic paint.

MAIN PROPERTIES
Unsaponifiable - flexible.

RECOMMENDED USES
a) Coating of inner and outer walls that can be exposed to high humidity, f.i. bathrooms, kitchens, etc.
b) Topcoat on Dakfill Mew (improved resistance against stagnating later and less dirt retention) or on Noxyde (less dirt retention).

Secco Super - Water repellent product based on siloxanes

DESCRIPTION
Water repellent product based on polys iloxanes.

MAIN PROPERTIES
Water repellent - water vapour permeable (breathing) - colourless - does not change the colour of the substrate - may be applied on dry recent masonry.

RECOMMENDED USES
Water repellent treatment of porous walls (bricks, concrete, cement, etc.).

Fassiclor - Paint for swimming pools

DESCRIPTION
Solvent borne chlorinated rubber paint.

MAIN PROPERTIES
Alkali and acid resistant - excellent water resistance - U.V. stable.

RECOMMENDED USES
Decorative painting of swimming pools or ponds in concrete.

Pegagraff Hydro - Anti-graffiti Protection, 2 Component Satin

DESCRIPTION
Two-component water borne polyurethane acrylic varnish.

MAIN PROPERTIES
Colourless - U.V. resistant - excellent flow out - solvent resistant thus allowing to remove most graffiti easily - very abrasion resistant - water vapour permeable.

RECOMMENDED USES
a) Colourless anti-graffiti protection of many substrates
b) Colourless varnish giving very good protection for floors, walls and interior surfaces.

Pegagraff Hydro Cleaner - Cleaner for Pegagraff Hydro

DESCRIPTION
Thixotropic cleaning liquid.

MAIN PROPERTIES
Active and quick removal of most graffiti on a substrate treated with
Pegagraff-Hydro.
It is not advised to apply this product on a painted substrate that is not protected by an anti-graffiti product, or on porous materials like for instance bricks, cement rendering, plaster, etc. Cleaner Pegagraff Hydro has no aggressive influence on the substrate, but is dangerous for old unprotected paints.

RECOMMENDED USES
Can be used to remove graffiti on Pegagraff Hydro and to clean non-painted substrates that have been contaminated with graffiti, like for instance marble, smooth concrete, metal and non-porous materials.